Introduction to the working principle of the cross cutting machine
Cross cutting machine is a mechanical equipment that cuts wide paper, mica tape, or thin film into multiple narrow materials. It is commonly used in papermaking machinery, wire and cable mica tape, and printing and packaging machinery.
Working principle:
1. The cross cutting machine needs to cut the entire roll or sheet of raw materials into fixed lengths, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., all of which require fixed length cutting control.
2. The cutting length can be continuously set, and if there is an error in the actual cutting length, it is easy to calibrate by setting parameters.
3. Splitting control is divided into two types: static and dynamic slitting: accurately stopping the machine when the set length is reached, then static slitting processing, and restarting operation after slitting; When the set length is reached, a cutting signal is sent out without stopping the machine, and the cross cutting machine dynamically cuts and processes the material during its movement.
